What are the parts of
the bunsen burner?
pls say all and pls define its parts. like the collar barrel etc etc. all ok?!
Answer:
bunsen burner with needle valve. The hose barb for the gas tube is facing left and the needle valve for gas flow adjustment is on the opposite side. Air inlet on this particular model is adjusted by rotating the barrel, thus opening or closing the vertical baffles at the base.
The device safely burns a continuous stream of a flammable gas such as natural gas (which is principally methane) or a liquified petroleum gas such as propane, butane, or a mixture of both. At the time of its invention, the Bunsen burner would have mostly burnt coal gas.
The burner has a weighted base with a connector for a gas line (hose barb) and a vertical tube (barrel) rising from it. The hose barb is connected to a gas nozzle on the lab bench with rubber tubing. Most lab benches are equipped with multiple gas nozzles connected to a central gas source, as well as vacuum, nitrogen, and steam nozzles. The gas then flows up through the base through a small hole at the bottom of the barrel and is directed upward. There are open slots in the side of the tube bottom to admit air into the stream via the Venturi effect, and the gas burns at the top of the tube once ignited by a flame or spark. The most common methods of lighting the burner are using a match or a spark lighter.
The amount of air (or rather oxygen) mixed with the gas stream affects the completeness of the combustion reaction in the flame. Less air yields an incomplete and thus cooler reaction, while a gas stream well mixed with air provides oxygen in an equimolar amount and thus a complete and hotter reaction. The air flow can be controlled by opening or closing the slot openings at the base of the barrel, similar in function to a car's carburetor.
If the collar at the bottom of the tube is adjusted so more air can mix with the gas before combustion, the flame will burn hotter, appearing blue as a result. If the holes are closed, the gas will only mix with ambient air at the point of combustion, that is, only after it has exited the tube at the top. This reduced mixing produces an incomplete reaction, producing a cooler but brighter yellow flame which is often called the "safety flame". The yellow flame is luminous due to small soot particles in the flame which are heated to incandescence. When the burner is regulated to produce a hot, blue flame it can be nearly invisible against some backgrounds. Increasing the amount of fuel gas flow through the tube by opening the needle valve will of course increase the size of the flame. However, unless the airflow is adjusted as well, the flame temperature will decrease because an increased amount of gas is now mixed with the same amount of air, starving the flame of oxygen
Look it up on Wikipedia. They have a full description there I could have cut and paste in here.
More Questions and Answers:
General chem?
What is the smallest amylase (in terms of molecular weight) ever reported? I really want to know.?
Which of the following is true of nonane, C9H20, which has a density of 0.79 g/mL, melts at -51°C, and boils a
I have 945ml of 75% ethanol solution?
Is it any difference precipitate and extraction with methanol and ethanol?
What volume of carbon monoxide gas at STP is produced from 6.14 g calcium phosphate and...?
What does the bonding between Cl and Mg form?
What is the "golden pathway" in Chemistry?
Convert 720 mm Hg to kPa?
Answer:
bunsen burner with needle valve. The hose barb for the gas tube is facing left and the needle valve for gas flow adjustment is on the opposite side. Air inlet on this particular model is adjusted by rotating the barrel, thus opening or closing the vertical baffles at the base.
The device safely burns a continuous stream of a flammable gas such as natural gas (which is principally methane) or a liquified petroleum gas such as propane, butane, or a mixture of both. At the time of its invention, the Bunsen burner would have mostly burnt coal gas.
The burner has a weighted base with a connector for a gas line (hose barb) and a vertical tube (barrel) rising from it. The hose barb is connected to a gas nozzle on the lab bench with rubber tubing. Most lab benches are equipped with multiple gas nozzles connected to a central gas source, as well as vacuum, nitrogen, and steam nozzles. The gas then flows up through the base through a small hole at the bottom of the barrel and is directed upward. There are open slots in the side of the tube bottom to admit air into the stream via the Venturi effect, and the gas burns at the top of the tube once ignited by a flame or spark. The most common methods of lighting the burner are using a match or a spark lighter.
The amount of air (or rather oxygen) mixed with the gas stream affects the completeness of the combustion reaction in the flame. Less air yields an incomplete and thus cooler reaction, while a gas stream well mixed with air provides oxygen in an equimolar amount and thus a complete and hotter reaction. The air flow can be controlled by opening or closing the slot openings at the base of the barrel, similar in function to a car's carburetor.
If the collar at the bottom of the tube is adjusted so more air can mix with the gas before combustion, the flame will burn hotter, appearing blue as a result. If the holes are closed, the gas will only mix with ambient air at the point of combustion, that is, only after it has exited the tube at the top. This reduced mixing produces an incomplete reaction, producing a cooler but brighter yellow flame which is often called the "safety flame". The yellow flame is luminous due to small soot particles in the flame which are heated to incandescence. When the burner is regulated to produce a hot, blue flame it can be nearly invisible against some backgrounds. Increasing the amount of fuel gas flow through the tube by opening the needle valve will of course increase the size of the flame. However, unless the airflow is adjusted as well, the flame temperature will decrease because an increased amount of gas is now mixed with the same amount of air, starving the flame of oxygen
Look it up on Wikipedia. They have a full description there I could have cut and paste in here.
The answers post by the user, for information only, FunQA.com does not guarantee the right.
More Questions and Answers: