Coke and Mentos?

I have a school project to do and i need to get the coke and mentos reaction the highest i can. what are some tricks i can do to make it higher?

Answer:
First off, use _diet_ coke.

Also, restrict the opening (like a nozzle on a hose makes the water go farther). The nozzle has to be in place when the mentos are dropped into the coke, and there's nowhere enough time to screw one on. So here's what you do:

Get a strong magnet and a steel nut or similar object that will fit into the neck of the coke bottle. The magnet goes on the outside of the bottle neck and the steel thing goes on the inside. Now the neck of the bottle is blocked by the steel piece, which is held in place by the magnet.


Stack mentos on top of the steel piece. The magnet must be strong enough to hold the weight of the steel plus the mentos until you are ready to release.

Attach the nozzle (securely!) to the top of the bottle.

When you are ready for the demo, simply pull the magnet away from the neck of the bottle. The steel and the mentos will drop into the coke. And we all know what happens after that.

Do this outside, OK?
more mentos
Add more mentos
use a test tube with a card on top the 2 liter all stacked in the tube slide the card away and let them all fall in the coke at once.Use coke its much more sticky.
Have a look at the insane amount of videos on Youtube that cover diet coke/coke and mentos reactions.
there was a TV show on discovery channel called mythbusters.they did lots of things to intensify and figure out why mentos and soda react go to discovery channels website maybe they have that episode to watch.
Make sure its DIET coke.. regular coke doesn't work as well maybe because of the extra sugar.. we made a paper cylinder and put the entire box of Mentoes in and we covered it for a spilit second with cardboard and then let it go it went WAY high!! When we used other diet soda..or only part of the box it wasn't as dramatic about half the height.
Have fun!! and make sure you experiment outside.. less mess to clean up :-)
u can shake the coke and quickly drop like 3 mentos into in.

u can put the mentos on a string so its not as easy to miss the hole
Use diet coke
Try to get as many mentos in as fast as possible
The beaker trick works well..
The more mentos you have, the higher the soda
Well, since its for a school project, I will not give you the direct answer. Do research on the Bernoulli Principle. That will help you get a higher stream.
Make a small diameter nozzel by drilling a hole in the cap. You can suspend the mentos on a string through the drilled hole and release them when you are ready. You can also drill the mentos and thread the string through them as a means of attaching to the string.

As the mentos are going to be stacked you will have to pour off some of the coke so that they are suspended above the coke.
Make sure the coke is room temperature, or a little warmer, and you can try drilling a hole, smaller in diameter than the bottle's neck into the cap , small enough for the mentos though...
The (smaller than the neck,) hole will of course restrict the pressure slightly more and it should thrust out to a higher degree. I'm no rocket scientist but it just might work.
Good luck on your project.
answers to some of your later questions:

1. If you don't have a drill, push a needle through it to string them up on a thread

2. You can use a nail and hammer to punch a small hole through the cap

3. Has anyone tried crushing the mentos first to get the most surface area to react with?
Last week a little boy died in Brazil after eating MENTOS and drinking Coca-Cola / PEPSI together. One year before the same accident happened with another boy in Brazil . Please check the experiment that has been done by mixing Coka-Cola (or Coka-Cola Light) with MENTOS .


So be careful with your self eating MENTOS (POLO's) and drinking COCA-COLA or PEPSI together.


u just put lots of mentos to a huge bottle of coca cola...then watch it out...but u need a huge place bcoz it gets spilt out like a fountain

The answers post by the user, for information only, FunQA.com does not guarantee the right.



More Questions and Answers:
  • May I ask you to send me an article about welding austenitic stainless steel?
  • Conceptualization and Engineering of the Titanic?
  • Can crusher?
  • Where can I buy air tools for demolition?
  • Can someone please help me find the dimensions of my paper boat I have to build?
  • How is plastic made strong for planes, etc?
  • With an all participants affordable solution; is dual-frames for buildings an interesting alternative/option?
  • Are we really beleive with the superstitious bloody mary emails?r dis cults?
  • How can you change 100 volts DC to 100 volts AC?
  • A carpenter cuts a 12ft long 2x4 into two pieces, one piece is 3ft longer than the other, what is their length