Rubber band car?

Hey folks for my physics project I am making rubber band project ,I made the car but I don't know where do I have to fix the rubber band to give the power to car.
so if u folks know this please help me!!

Answer:
Try affixing the rubber band to the front of the car, as a loop do not cut the rubber band. Then drill a small hole through the rear axle and glue in a short piece of a toothpick or some other small piece of wood. Also, for this to work the rear axle must be exposed behind the car and not underneath like a normal axle. When the glue has dried take the rubber band and stretch it back to the axle. Loop it over the toothpick and back wind the axle, wrapping the rubber band around the axle. When you are finished put the car on the ground and let go. The elastic will contract, turn the axle and your car will move forward.
Place a hook at the front end of the car, between the front wheels. then wrap it around the back axle of the car. PUll the rubber band really tight byrotating t he back wheels.

The answers post by the user, for information only, FunQA.com does not guarantee the right.



More Questions and Answers:
  • HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!i!!!!?
  • At what stage of a rockets flight is it going at its maximum speed? Explain.?
  • What accounts for the difference between the starting friction and the sliding friction?
  • HAI PUPUS.A ADIVCE FRM U plz...?
  • Can anybody tell me about last yrs' rankwise cutoff for various branches at pec?
  • Question in 3 phase AC circuit?
  • Trying to figure out how to measure dc current flow in a circuit?
  • What was the air resistance when it was dropped and its speed was 0 m/s?
  • What are some Simple Machines that could be found in a playground, or an Amusment Park?
  • How can I rate a main distribution panel serving 3 sub-main panels in an office building?