My place has lots of electricty needs but it cant handle the all of voltage?

ok so i have this camper thing in my driveway and then we were just chilling out and boom the power is out what should i do.

Answer:
Check your breakers,starting with any ground fault outlets in your camper(if you don't have any have them installed).then check any breakers in your house(typically in the fuse/breaker box) if your camper is tied into the house via an electrical cord.Try to only run minimal items at the same time or run items off of different circuits if possible.Just a few hints I hope it helps.If unsure of what you are doing leave it for a professional for safety purposes.
If it tripped the main breaker in you house and knocked the whole house out, you might need a new electrical service with a larger main breaker. If it just tripped one of the branch circuit breakers in the house, and there was a bunch of other stuff that went off when this happened, you need to split up the loads connected to this circuit. Either install a new dedicated circuit for the camper outlet, or connect the camper to a different circuit that doesn't have so much exixsting load connected to it.
You probably blew a breaker .
Check the manual for the camper.
Most ask for a 30 amp 120 volt circuit.
If the lights, A/C then the M/wave oven ect are in use on a standard circuit = dark.

The answers post by the user, for information only, FunQA.com does not guarantee the right.



More Questions and Answers:
  • Future of Technology!?
  • Any one know about Oxford College of engineering...?
  • What is the step by step process of asbestos removal, experts only, no one timers.?
  • The decision to "Pull" WTC 7 was made just before its collaps according to owner Silverstien. How?
  • What kind of fuse do i use on a n electric bicycle that runs on 24 volts?
  • How can leaking electrical current possibly damage steel reinforcements in a building?
  • What is movement detector and how to design it?
  • How can i find the datasheet for this IC :"sm6130B"?
  • What is high aspect ratio in drilling the slot in micro edm?