What is the difference between Mechanical Engineering and Mechanical Engineering Technology??
I have a few more questions also:
first::: Which one includes more actual building?
second::: Which one is most likely harder?
third::: Which one will most likely pay more?
fourth: What kind of jobs would i be able to get with a degree in either? Thanks!!
Answer:
Technology id actually the application part whereas Engineering is the Theoritical part.
But now a days, Even in Mechanical Engineering also, Ppl are more emphasizing on Application part(i.e.Technology) through various aspects like Industrial Visits, Live Projects, etc made as a part of the curriculum.
So, It doesn't matter whatever u study.
And both are tough and at the same time, both are easier.
The jobs u get will be mostly the same. There will not be any much difference in the pay too.
Actually, Here in India, there are two kinda of courses. B.E(Bachelor of Engineering) and B.Tech (Bachelor of Technology). I'm pursuing my B.Tech Mechanical final year and I got a job in ASHOK LEYLAND in R&D (Research & Development ) wing.
So it basically depends on the projects you do wherever u r.
Engineers take 4-5 years for study. More theory. Some practical
Eng. Techs take 2-3 years for study. Less theory.
Engineers are the only ones who can 'seal' designs, etc, and tend to make more $ eventually.
First and foremost, I assume you are talking about a 4 yr. baccalaureate Mechanical Engineering and 4 yr. baccalaureate Mechanical Engineering Technology programs. If you are talking about a 2 yr. MET program then disregard what I am about to write:
1. Mech. Engr. Tech. is going to be more hands on and applied design work.
2. Mech. Engineering is harder, HOWEVER, don't let all that theory BS fool ya' because I know guys who are ET grads that can blow the ME guys out of the water when it comes to designing stuff. *side note* MET guys still take calculus, physics, thermo, heat transfer, mechanical design, fluids, engineering mechanics and all that other good stuff that the ME guys take.
3. ME's will most likely make more coming out of college, but if you are good at what you do and are an ET grad, it won't matter. In a couple of years (if you get your PE) you'll be making the same.
4. Since mechanical is a broad field you could get into the auto industry, aerospace, manufacturing, construction, HVAC design...i'm sure there are plenty more. The one caveat for MET is most people in industry might look down on the MET degree and hire someone with the Mech. Engr. degree
Lastly...yes there are 2 yr. MET programs that will get you a technician job, but the 4yr. degree is great if you are a hands on person. Your best option after graduation (depending on the state) is to take the Fundamentals of Engineering test and eventually become a Professional Engineer (Yes this means you can be the one who places that lovely stamp on plans!!). I know some states don't allow ET grads to becomre professionally licensed, and there is whole other argument I have for that one. Anyways, I hope this helps you out my friend. Good luck in the future!! =)
More Questions and Answers:
Can you name the finest (top) engineering/technological institutes in your country.?
What are the dangers and hazards of electricty??
Is it wrong to put extension cords together to get a longer cord?
Chilled water pipes?
American scale of coefficient of friction floor test versus European scale. I need a conversion table please?
Civil engineering?? WOuld i need alot of math?
If I can use enough jumbo hand fans, can I build something out of them to use like a hang glider?
Is bachelor of computing recognized in india??how is it different from a BSc. degree?Pleeeeeeeeease help!!?
What advantage is realize by use of a short wavelength light beam (Green versus Red)?
first::: Which one includes more actual building?
second::: Which one is most likely harder?
third::: Which one will most likely pay more?
fourth: What kind of jobs would i be able to get with a degree in either? Thanks!!
Answer:
Technology id actually the application part whereas Engineering is the Theoritical part.
But now a days, Even in Mechanical Engineering also, Ppl are more emphasizing on Application part(i.e.Technology) through various aspects like Industrial Visits, Live Projects, etc made as a part of the curriculum.
So, It doesn't matter whatever u study.
And both are tough and at the same time, both are easier.
The jobs u get will be mostly the same. There will not be any much difference in the pay too.
Actually, Here in India, there are two kinda of courses. B.E(Bachelor of Engineering) and B.Tech (Bachelor of Technology). I'm pursuing my B.Tech Mechanical final year and I got a job in ASHOK LEYLAND in R&D (Research & Development ) wing.
So it basically depends on the projects you do wherever u r.
Engineers take 4-5 years for study. More theory. Some practical
Eng. Techs take 2-3 years for study. Less theory.
Engineers are the only ones who can 'seal' designs, etc, and tend to make more $ eventually.
First and foremost, I assume you are talking about a 4 yr. baccalaureate Mechanical Engineering and 4 yr. baccalaureate Mechanical Engineering Technology programs. If you are talking about a 2 yr. MET program then disregard what I am about to write:
1. Mech. Engr. Tech. is going to be more hands on and applied design work.
2. Mech. Engineering is harder, HOWEVER, don't let all that theory BS fool ya' because I know guys who are ET grads that can blow the ME guys out of the water when it comes to designing stuff. *side note* MET guys still take calculus, physics, thermo, heat transfer, mechanical design, fluids, engineering mechanics and all that other good stuff that the ME guys take.
3. ME's will most likely make more coming out of college, but if you are good at what you do and are an ET grad, it won't matter. In a couple of years (if you get your PE) you'll be making the same.
4. Since mechanical is a broad field you could get into the auto industry, aerospace, manufacturing, construction, HVAC design...i'm sure there are plenty more. The one caveat for MET is most people in industry might look down on the MET degree and hire someone with the Mech. Engr. degree
Lastly...yes there are 2 yr. MET programs that will get you a technician job, but the 4yr. degree is great if you are a hands on person. Your best option after graduation (depending on the state) is to take the Fundamentals of Engineering test and eventually become a Professional Engineer (Yes this means you can be the one who places that lovely stamp on plans!!). I know some states don't allow ET grads to becomre professionally licensed, and there is whole other argument I have for that one. Anyways, I hope this helps you out my friend. Good luck in the future!! =)
The answers post by the user, for information only, FunQA.com does not guarantee the right.
More Questions and Answers: