Does anyone know how EN24T compares to 13-8PH?

Charpy Factor + UTS

Answer:
*AISI Type S13800 Stainless Steel (PH 13-8 Mo) longitudinal properties, condition H1000.

*Tensile Strength, Ultimate :1480 MPa 215000 psi .
*Tensile Strength, Yield 1415 MPa 205000 psi at 0.2% offset .
*Elongation at Break :13 % 13 % in 50 mm
*Modulus of Elasticity :221 GPa 32100 ksi
*Charpy Impact :54 J ,39.8 ft-lb , 52 J at room temperature, 41J at 0°C, 27 J at -54°C, 22 J at -73°C, 16 J at -115°C, 9 J at -140°C, 5 J at -195°C .
*Density 7.8 g/cc 0.282 lb/in³

*EN24T:
[BS 970: 1955: En24T]
[USEN 24T / USALOY 24T]
Ultimate tensile strength[Min.]:850MPa.
http://www.matweb.com/search/searchprope...
13-8PH has a UTS around 1650 MPa, EN24T has a UTS of around 850 MPa

The answers post by the user, for information only, FunQA.com does not guarantee the right.



More Questions and Answers:
  • Solar panels powered by "fake" light?
  • What do you add to ice (H2O) crystals to prevent it from melting at room temperature?
  • The solid fuel consumption in asia?
  • About thermodynamics?
  • How would a robot running Isaac Asimovs 3laws of robotics react in a warzone?
  • I need sites for diagrams.?
  • Excavation methodology and embankment protection tips for inshore construction?
  • What does 7.75Lx5.5W mean?
  • What is sensitivity?